One Bed. Two Different Nights.
One person asleep. One person counting the snores. SNOR LOCK is a one-piece mouth guard you mold at home. It holds your lower jaw a fixed ¼ inch (6 mm) forward to help reduce snoring.
- U.S. DuPont™ Material
- Korean Engineering
- FDA-Cleared
- 30-night guarantee
- Made in Korea
- For adults 18+
- FDA-cleared, 510(k) K222475
- U.S. DuPont™ material
- Fixed ¼-inch (6 mm) advancement
- Boil-and-bite fit
- Remoldable
- Made in Korea
Why the Lower Jaw?
Snoring has more than one cause. For many people, the jaw and tongue relax during sleep and slide back, narrowing the space behind the tongue.
SNOR LOCK holds your lower jaw a fixed ¼ inch (6 mm) forward, which is designed to help keep that space more open while you sleep.
- WithoutOn the model, the tongue slides back and the airway lights turn red.
- With SNOR LOCKThe lower jaw is held forward and the lights stay blue.
Demonstration on an anatomical model, from the manufacturer's Korean TV shopping segment. The lights trace the airway behind the tongue.
Simple, by Design.
One-Piece Design
Upper and lower trays are joined in a single piece, so there is nothing to assemble or adjust.
Molded to Your Teeth
Boil-and-bite at home. Remold it if the fit needs adjusting.
Fixed ¼ in (6 mm) Forward
Holds your lower jaw in the same forward position every night.
FDA-Cleared, OTC
510(k) K222475 for adults 18+, as an aid in the reduction of snoring.
Molded at Home in About 5 Minutes.
You shape SNOR LOCK to your own teeth with hot water. If the fit isn't right, you can do it again.
- 01
Widen
Hold both sides and spread the frame until it slips over your upper teeth. It won't break.
- 02
Heat water
Get water to 167 to 185°F (75 to 85°C). Use a hot water dispenser, or let boiled water cool in the cup for about 2 minutes.
- 03
Soften 20 sec
Attach the fitting handle to the front tab. Dip the guard all the way in for 20 seconds without touching the cup, then lift it out and shake off the water.
- 04
Bite 1 min
Seat your upper teeth in the top groove, move your lower jaw forward into the bottom groove, and bite firmly for 1 minute.
- 05
Set 2 min
Put it in cold water for 2 minutes to lock in the shape of your teeth.
Check your impressions after step 5. If they look shallow or unclear, soften it again and remold from step 2.
Impressions not clear? Start again from step 2. Bite gently the first time and a little firmer the second.
Which side is up? The larger V shape goes on your upper teeth.
Care: Brush it daily with a toothbrush and toothpaste under cool water, and deep-clean it once a week with a denture cleanser. Never boil it or sterilize it with heat.
From the manufacturer's instructions. Read the full instructions and warnings in the box before you start. Fitting questions
How SNOR LOCK Compares.
Different snoring products work on different things. Here is what each one is designed to do.
| Nasal strips | Chin straps | SNOR LOCK | |
|---|---|---|---|
| What it does | Opens the nostrils | Holds the mouth closed | Holds the lower jaw ¼ in (6 mm) forward |
| Positions the lower jaw | |||
| Fitted to your teeth | |||
| Reusable | Single-use |
Based on how each product type is designed to work. Individual results vary.
Is It Right for You?
Check this first. It covers who SNOR LOCK is made for, and who should skip it.
A good fit if you
- are 18 or older
- snore and want an at-home option
- can breathe through your nose while you sleep
Not for you if you
- have loose teeth, advanced gum disease, or full dentures
- have jaw-joint (TMJ) problems
- stop breathing, gasp, or wake up exhausted at night. Talk to a doctor first.
SNOR LOCK is not intended to diagnose or treat sleep apnea. Read all warnings in the included instructions before use.
Choose Your SNOR LOCK.
Shop SNOR LOCK directly on our website. Choose your pack on the product page and review delivery options at checkout.
Questions about the product? support@snorlockglobal.com
Questions, Answered.
Will it stop my snoring?
SNOR LOCK is designed to help reduce snoring. Snoring has more than one cause, so results vary from person to person.
Is SNOR LOCK FDA-cleared?
Yes. SNOR LOCK went through the FDA 510(k) process (K222475) and is cleared for over-the-counter use by adults 18+ as an aid in the reduction of snoring.
What is it made of?
Because you wear it all night, the material matters. SNOR LOCK is made with U.S. DuPont™ material and manufactured in Korea, and its EVA body was tested for biocompatibility (ISO 10993) for the FDA 510(k) submission.
DuPont™ is a trademark of its owner. SNOR LOCK is not affiliated with DuPont.
How do I mold it?
Soften it in 167 to 185°F (75 to 85°C) water for 20 seconds, bite firmly for 1 minute, then set it in cold water for 2 minutes. If the fit isn't right, you can remold it.
Who shouldn't use it?
Skip it if you can't breathe through your nose while you sleep, or if you have loose teeth, advanced gum disease, full dentures, or jaw-joint (TMJ) problems. If you stop breathing, gasp, or wake up exhausted at night, talk to a doctor first. SNOR LOCK is not intended to diagnose or treat sleep apnea.
How do shipping and returns work?
Purchase directly on our website. Check the product page, checkout, and our shipping and refund policies for current prices, delivery options, and return conditions. For order or fitting questions, contact support@snorlockglobal.com.
Ready for a Quieter Night?
Shop SNOR LOCK directly on our website. Choose your pack on the product page and review delivery options at checkout.